56
English
PHONE
MAKING A PHONE CALL D
THROUGH A CONVENTIONAL
SYSTEM
To initiate a phone call:
Press the preprogrammed Phone button, and
skip to step 5.
–or–
Press the PTT button, and if the Hot keypad
feature has been programmed by your dealer,
do the following:
5 Press and Release the PTT button.
• If phone access is successful, a dial tone
sounds.
• If phone access is unsuccessful, a low-
pitched alternating tone sounds. Discon-
nect the call (see step 8) and try again.
6
Enter the phone number with the keypad. The
number is automatically sent without pressing
the PTT button again.
–or–
m to select a
number from the
phone list.
Press and release the PTT button again to
send the number.
7 Hold the radio in a vertical position with the
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth. Press the PTT button to talk;
release it to listen.
8 To disconnect the phone call:
Press and hold ( to exit Phone.
D no longer appears on the LCD.
XXX-XXX-XXXX
1 Select a conventional zone and channel that
have been programmed for telephone.
2 ) to enter menu mode.
3
m until
4 ) to select
D appears on the LCD screen when you are
in Phone Mode.
Phone
Phone
07_Phone.fm Page 56 Wednesday, August 3, 2005 3:26 PM
To Next Page
Loading...
