Motorola Professional Series

27
English
GETTING STARTED
SENDING A CONVENTIONAL CALL
Note: In the United States, FCC regulations
require you to monitor the conventional
channels before sending a call. The
monitor feature (see page 10) can be
accessed through one of your
programmable buttons.
SENDING A TRUNKED CALL
4
m until you see the desired channel/tkgp.
5
) to select the desired channel/tkgp.
1
Turn your radio on.
2
Select the desired channel (see page 26)
“Selecting a Channel/Talkgroup”).
3
Hold the radio in a vertical
position at a distance of about
1 to 2 inches (2.5 to 5 cm)
from your mouth.
4
Press the PTT button and speak clearly into
the microphone. The LED indicator lights
steady red while the call is being sent.
5
Release the PTT button to listen.
1
Turn your radio on.
2
Select the desired zone and talkgroup (see
page 26 “Selecting a Channel/Talkgroup”).
3
Hold the radio in a vertical
position at a distance of about
1 to 2 inches (2.5 to 5 cm)
from your mouth.
03_GettingStarted.fm Page 27 Wednesday, August 3, 2005 3:23 PM
All manuals and user guides at all-guides.com