Motorola Professional Series

52
English
SCAN
PRIORITIZING A CHANNEL/
TALKGROUP IN A SCAN LIST
You may want to check the activity on one or
two channels more frequently than others. You
can do this by prioritizing them:
Note: Even if there is activity on a non-priority
channel, your radio will automatically switch
to an active priority channel and indicate
the activity with a short tone.
Setting Priority Channels or Talkgroups
Priority Channel Scanning Sequence
None specified Ch1➠Ch2➠Ch3➠
Ch4➠…Ch1
Channel 2
(Priority 1)
Ch2➠Ch1➠Ch2➠Ch3➠
Ch2➠Ch4➠Ch2➠…Ch1
Channel 2
(Priority 1) and
Channel 8
(Priority 2)
Ch2➠Ch1➠Ch8➠Ch3➠
Ch2➠Ch4➠Ch8➠…Ch1
1 ) to enter Menu Mode.
2 m until
3 ) to select
4 m until
5 ) to select
6 m until
7 ) to select
8 m until
–or–
You see the current priority talkgroup or
channel.
9 ) to select the desired priority level.
10 m until you see the channel you want to
prioritize.
Program Lists
Program Lists
Scan List
Scan List
Edit Priority?
Edit Priority?
Priority #1
Priority #2
06_Scan.fm Page 52 Wednesday, August 3, 2005 3:26 PM
All manuals and user guides at all-guides.com