29
English
RADIO CALLS
RADIO CALLS
MAKING A SELECTIVE CALL
You can make a selective call to a particular
radio or group or radios, as programmed by
your dealer, using MDC or Quik Call II encode
signaling, provided the receiving radio has the
associated decode capability. DTMF encode
signaling is supported; DTMF decode requires
an additional board assembly in your radio.
To make a Selective Call:
Press the preprogrammed Radio Call button
(see page 11) and proceed to step 4
–
or–
1 ) to enter Menu Mode.
2 m until
3 ) to select
4 m until
5 ) to select
Radio Call
Radio Call
Selective Call
Selective Call
6
m to locate the desired ID in the Radio Call
List.
–or–
Enter the ID number of the radio you want to call.
7 Press the PTT button to send the call.
The radio sounds a continuous tone, if
programmed by your dealer.
8 Press the PTT button and talk; release the
PTT button to listen.
9
( To return to
–
or–
Hold down
( to exit Menu Mode.
Selective Call
04_Radio_Calls.fm Page 29 Wednesday, August 3, 2005 3:21 PM
To Next Page
Loading...
