Motorola PS000029A03 - Charger Setup; Main Menu

21
English
Lithium-ion Battery Preparation for Shipment
Table 10: Preparing an IMPRES 2 or IMPRES Lithium-ion Battery for
Shipment.
Status Charger Display LED Indicator
Battery Insertion
Battery Discharging
SHIP DISCHARGE
xxxx0mAh yyy%
Battery requires Calibration, but
Calibration is disabled in charger:
Alternating Amber /
Green for 4 seconds
Battery Discharging
SHIP DISCHARGE
xxxx0mAh yyy%
Steady Amber
Rapid Charging
RAPID CHARGE
xxxx0mAh yyy%
Steady Red
Charge Complete
Ready to Ship
LI READY TO SHIP
xxxx0mAh yyy%
Battery does not require
Calibration:
Steady Green
Battery requires Calibration, but
Calibration is disabled in charger:
Alternating Amber /
Green
Fault
WARNING:
NOT CHARGEABLE
REMOVE& REINSERT
Flashing Red
Standby
• Battery is waiting to rapid
charge.
• Battery may be too hot,
too cold, or low voltage.
WARNING:
HOT BATTERY
WAITING TO CHRGE
OR
COLD BATTERY
WAITING TO CHRGE
OR
VERY LOW BATTERY
WAITING TO CHRGE
Flashing Amber
MN002407A01.book Page 21 Thursday, February 16, 2017 3:18 PM