34
English
Analyzer Mode
Pocket #1 Analyzer Mode may be entered by firmly pressing the OK
button from more than 1 second. Analyzer Mode operates only in
Pocket #1.
Pressing OK displays data available from the battery in Pocket #1 or
the charging pocket inserted into Pocket #1 and charger software
version data.
• Press the Right Arrow to sequence through the data as represented.
• Press the Left Arrow to sequence through the data in reverse order.
Press Back to exit from Analyzer Mode. Press OK to confirm exit.
If no Keypad button is pressed for 10 minutes, then the charger will exit
Analyzer Mode and will return to normal message displays.
While in Analyzer Mode, if the battery is removed and replaced by
another battery, the last parameter displayed for the first battery will be
the first parameter displayed for the second battery. For example,
Battery IMPRES Cycles is being displayed, that IMPRES battery is
removed from Pocket #1, and a different IMPRES battery is inserted
into Pocket #1, then the first parameter display for the second battery
will be Battery IMPRES Cycles.
MN002407A01.book Page 34 Thursday, February 16, 2017 3:18 PM
To Next Page
Loading...
