28
English
Calibration Menu
The Calibration setup selections enables or disables the Discharge
phase of Calibration / Reconditioning. The Discharge phase precedes
the full charge required for successful Calibration / Reconditioning.
This feature is useful when the charger is deployed to a location
requiring the battery to be at a charged state of readiness as quickly as
possible. In these situations, waiting a few extra hours for full battery
discharge may be inconvenient.
If an IMPRES 2 or IMPRES battery is due for Calibration, this battery is
discharged when inserted into the charger, and the charger has
Calibration disabled, the charger will take advantage of this situation.
Completion of battery charge will automatically complete IMPRES
battery Calibration.
MN002407A01.book Page 28 Thursday, February 16, 2017 3:18 PM
To Next Page
Loading...
Need help?
General
