Motorola r765IS

81
advanced features
3 Your handset requires that you create a
bond in order to connect with a Bluetooth
headset. Press
- under Yes when you are
prompted to bond with the headset.
4 Enter the Bluetooth pass key.
Some Bluetooth devices ship with
Bluetooth PINs. Please refer to your
Bluetooth device’s user guide to locate
this information.
If a device ships without a Bluetooth PIN,
then you can enter any PIN for that
device. To establish a connection to that
device, enter the same PIN for both your
handset and the device. For example, if
you enter 1234 as the device’s PIN, then
enter 1234 as your handset’s PIN.
5 Press - under Ok .
Note: This handset offers Bluetooth auto pair
feature with auto pair compatible Motorola
devices. When bonded via Bluetooth with a
certain device, the pin will not be required.
connect your handset with another
Bluetooth device
Find it: > Bluetooth > Link To Devices .
1 Select the device you want from the list of
found devices on your screen.
2 Create a bond if you are prompted to do
so.
Tip: If you have previously connected to a
device, the device will be stored on your
handset so you can connect with it easily.
use Bluetooth during a call
You can connect with available Bluetooth
devices during a call.
Note: If the Handsfree Devices list contains only
one device, then your handset will
automatically try to connect to that device.
r765_Armadillo.book Page 81 Wednesday, August 27, 2008 7:01 PM