Setting Up a USB Driver in Windows 98 Second Edition, continued
Introduction Before You Begin Installation & Configuration FAQ
Troubleshooting
Glossary
License
SB5100 Series Cable Modem User Guide 15
After all the necessary files are loaded, the window at upper left is displayed
confirming a successful installation.
10 Click Finish. The window at bottom left is displayed.
11 Click Yes to restart your computer.
When you finish setting up the USB driver, you can continue with “Configuring TCP/IP in
Windows 95, Windows 98 SE, or Windows Me” on page 23.
If you have difficulties setting up the USB driver, perform “Removing the USB Driver from
Windows 98 Second Edition or Windows Me” on page 45 and repeat this procedure. If
that does not correct your problem, see the Regulatory, Safety, Software License, and
Warranty Information card provided with your SURFboard cable modem for information
about obtaining warranty service.
To Next Page
Loading...
