Motorola SB5100 Series - Configuring TCP;IP in Windows 2000

SB5100 Series Cable Modem User Guide 26
Introduction Before You Begin Installation & Configuration FAQ
Troubleshooting
Glossary
License
Configuring TCP/IP in Windows 2000
1 On the Windows Desktop, click Start.
2 Select Settings and then Control Panel from the pop-up menus.
3 Double-click the Network and Dial-up Connections icon on the Control Panel
window.
In the steps that follow, a connection number such as 1, 2, or 3 is a reference
displayed on PCs with multiple
network interfaces. PCs having only one network
interface may display only the label Local Area Connection .
4 On the Network and Dial-up Connections window, double-click Local Area
Connection number. The value of number varies from system to system. The Local
Area Connection number Status window is displayed.