Motorola SB5100 Series - Configuring TCP;IP in Windows 95, Windows 98 SE, or Windows Me

SB5100 Series Cable Modem User Guide 23
Introduction Before You Begin Installation & Configuration FAQ
Troubleshooting
Glossary
License
Configuring TCP/IP in Windows 95,
Windows 98 SE, or Windows Me
1 On the Windows Desktop, click Start.
2 Select Settings and then Control Panel from the pop-up menus.
3 Double-click the Network icon on the Control Panel window.
4 Select the Configuration tab on the Network window.
5 Verify that TCP/IP is installed for the adapter that will be used to connect to the
SURFboard cable modem. If TCP/IP is installed, then skip to step 10. If TCP/IP is
not installed for the adapter, continue with step 6.
Although your SURFboard cable modem model number may
be different than in the images in this guide, the procedure is
the same.