SB5100 Series Cable Modem User Guide 16
Introduction Before You Begin Installation & Configuration FAQ
Troubleshooting
Glossary
License
Setting Up a USB Driver in Windows 2000
Be sure the SURFboard Cable Modem CD-ROM is inserted into the CD-ROM drive
before you plug in the USB cable. A few seconds after you complete the USB
connection, the Found New Hardware window is displayed.
1 Click Next.
2 Be sure “Search for a suitable driver for my device” is selected.
3 Click Next.
Although your SURFboard cable modem model number may
be different than in the images in this guide, the procedure is
the same.
To Next Page
Loading...
