Disassembly/Reassembly Procedures: Radio Reassembly – Detailed 5-23
Figure 5-34. Antenna screw reassembly
9. Insert the antenna plug and a new
escutcheon cover to the back housing as shown in
Figure 5-35.
10.Turn the radio on.
Figure 5-35. Antenna plug and screw plug reassembly
Tighten the antenna screw with tightening torque as below
→ 0.8lbf. in. or
→ 0.9 N-m or
→ 0.92 kgf-cm
DO NOT over tighten the antenna screw.
Escutcheon Cover
Antenna Plug
To Next Page
Loading...
