You Hear Tone Name Heard
Unique,
High-Pitched
Chirp
Priority Status When a priority message is received.
Incremental-
Pitched
Tone
Bluetooth Paired When Bluetooth accessory is paired with the radio.
Bluetooth Connected When Bluetooth accessory is connected to the radio.
Decremen-
tal- Pitched
Tone
Bluetooth Unpaired When Bluetooth accessory is unpaired from the radio.
Bluetooth Disconnected When Bluetooth accessory is disconnected from the radio.
A Group of
Very High-
Pitched
Tones
Fall Alert Continuous
Tone
When radio is in Fall Alert mode and prepares to transmit
Emergency Alarm when the timer of this alarm ends.
Critical Fall Alert Con-
tinuous Tone
When radio is in Fall Alert Enhanced mode and prepares
to transmit Emergency Alarm when the timer of this alarm
ends.
Unique Low-
High Tone
Enhanced Zone Bank
Up
When EZB Up button is pressed to scroll the Enhance
Zone Bank up.
Unique
High-Low
Tone
Enhanced Zone Bank
Down
When EZB Down button is pressed to scroll the Enhance
Zone Bank down.
4.6
Display Color Change On Channel
This feature provides visual channel identification for users to have a quick visual recognition on a particular
channel.
Your radio must be programmed to allow you to use this feature.
For Model 3.5 and Model 2.5, when changing channels, the radio backlight on top display, radio keypad, and
accessories (DRSM or keypad Mic) changes to the programmed color.
The backlight on top display changes to white. If connected to accessories, the DRSM backlight changes to
white and the keypad mic backlight changes to green for the following scenarios:
● When changing to or powering up on invalid channels such as unprogrammed channels, receiver
frequency error channel and blank channels.
● The radio is in radio stun or radio lock mode.
NOTE: Radio stun or radio lock mode is only applicable to Model 3.5.
For hard key zeroize, key loading, and scan list programming, the backlight follows the home channel
backlight color.
68012005050-FY
Chapter 4: Status Indicators
35
To Next Page
Loading...
