7.2
Remote Monitor
This feature allows the system administrator to turn on the microphone of a targeted radio with a subscriber
alias or ID.
When remote monitor feature is activated, the audio transmission can be configured in Customer
Programming Software (CPS) to route the audio to the radio internal microphone, wired Remote Speaker
Microphone (RSM), or Bluetooth wireless microphone.
In life-threatening or critical situations, the system administrator can remotely monitor any audible activity
surrounding the targeted radio.
7.3
Scan Lists
Scan lists are created and assigned to individual channels or groups. Your radio scans for voice activity by
cycling through the channel or group. The sequence of scan is as specified in the scan list for the current
channel or group.
Your radio supports different types of Scan Lists:
● Conventional Scan List
● Talkgroup Scan List
● Trunking Priority Monitor Scan List
Refer to a qualified radio technician for the maximum number of Scan Lists to be programmed in your radio.
7.3.1
Intelligent Priority Scan
This feature allows you to add or delete conventional channels and trunking talkgroups from multiple systems
into the priority scan lists.
When the radio locks onto a channel in the Intelligent Priority Scan list, the radio scans for higher priority
member within the same Trunking or Conventional system.
7.3.2
Viewing a Scan List
Procedure:
Turn the 16-Position Select Knob to view the members on the list.
7.3.3
Viewing and Changing the Priority Status
Procedure:
Press the Top Side (Select) button to change the priority status of the currently displayed channel or the
scan list status icon of the currently displayed channel.
The radio shows one of following priority status icons and scenarios:
● A Scan icon indicates that the current channel is in the scan list as a non-priority channel. The LED
lights up solid green.
68012005050-FY
Chapter 7: Advanced Features
46
To Next Page
Loading...
