Your radio must be preprogrammed for you to use this feature.
Procedure:
Press the preprogrammed Call Alert Paging button to send a page to the preprogrammed ID.
If the call alert page is sent successfully, a tone sounds and the display shows the current zone and
channel name.
If the call alert page is not acknowledged, a tone sounds and the display shows the current zone and
channel name.
7.6
Recent Calls
Recent call menu allows you to view the recent incoming and outgoing call information.
You can view the information of the following type of calls:
● Call Alert
● Selective Call
● Private Call
● Phone Call (Outgoing Only)
● Emergency Call (Incoming Only)
NOTE: The Log Dispatch Calls Enable field need to be enabled in Customer Programming Software
(CPS) for your radio to log the dispatch call.
7.6.1
Instant Recall
This feature allows you to save and play back the recent received calls. All saved calls are removed upon
radio power cycle.
7.6.1.1
Saving and Playback Calls
When and where to use:
Procedure:
● Saving the recorded calls using the preprogrammed Record Playback button:
a. Long press the preprogrammed Record Playback button to save the recorded calls.
Radio displays Audio Saved momentarily.
Radio plays the saved call automatically if call saving is successful.
A tone sounds if call saving is not successful.
● Playback the saved calls using the preprogrammed Record Playback button:
a. Short press the preprogrammed Record Playback button to playback the saved calls.
68012005050-FY
Chapter 7: Advanced Features
49
To Next Page
Loading...
