7.20.3
Checking the Wi-Fi Configuration and Status of the
Radio
Procedure:
Long press the preprogrammed Wi-Fi button.
The display shows the current status of the Wi-Fi as described next.
WF SRCHG
Looking for available Wi-Fi networks that have been preprogrammed into the radio.
WF CNTG
In the process of connecting to a found Wi-Fi network.
WF CNTD
Connected to one of the preprogrammed Wi-Fi networks.
NO SERVICE
No available networks or connection with one of the networks failed.
If the radio is Wi-Fi connected, you see a Wi-Fi signal strength indicator,
on the top display.
7.21
Utilities
This chapter explains the operations of the utility functions available in your radio.
7.21.1
Using the Flip Display
When and where to use: This feature allows you to flip the content of the top display upside down. It is
particularly useful when you would like to read the top display while the radio is still in the carry holder
attached to your belt.
Procedure:
To flip the display, press and hold the programmed Light/Flip button.
7.21.2
Selecting a Basic Zone Bank
Prerequisites: The Basic Zone Select feature must be programmed to the 3-Position A/B/C Switch, while
the Basic Zone Bank feature must be programmed to any side button or Top (Orange) button to use this
feature.
68012005050-FY
Chapter 7: Advanced Features
72
To Next Page
Loading...
