18
Installing the Battery
To get started, just slip the battery out of its cover, insert the
battery and charge the battery.
Battery
Covers
Your phone’s battery is shipped uncharged and encased in a
protective cover. This handy cover keeps conductive material
from touching the battery terminals and reduces the risk of
injury or damage from a short circuit (see page 10). It’s a good
idea to keep your batteries covered when they’re not being used.
Removing the Battery Cover
1. Pull the release latch
back toward the
battery.
2. Lift the battery out.
Attaching the Battery Cover
The battery fits into its cover like a ski boot fits into a ski.
1. Place the battery’s “toe” into
the compartment as shown.
2. Press its “heel” down until
you hear it snap into place.
ST3000.01Book Page 18 Wednesday, March 8, 2000 2:32 PM
To Next Page
Loading...
