Symbologies 14 - 75
QR Inverse
Parameter # F1h 4Bh
This parameter sets the QR inverse decoder setting. Options are:
•
Regular Only - the digital scanner decodes regular QR bar codes only.
•
Inverse Only - the digital scanner decodes inverse QR bar codes only.
•
Inverse Autodetect - the digital scanner decodes both regular and inverse QR bar codes.
MicroQR
Parameter # F1h 3Dh
To enable or disable MicroQR, scan the appropriate bar code below.
*Regular
(00h)
Inverse Only
(01h)
Inverse Autodetect
(02h)
*Enable MicroQR
(01h)
Disable MicroQR
(00h)
To Next Page
Loading...
