Motorola Symbol DS6878 - Reconnect Attempt Interval

Radio Communications 4 - 15
Scan a bar code below to enable or disable Beep on Reconnect Attempt.
Reconnect Attempt Interval
When a digital scanner disconnects as it goes out of range, it immediately attempts to reconnect for the default
time interval of 30 seconds. This time interval can be changed to one of the following options:
• 30 seconds
• 1 minute
• 5 minutes
• 30 minutes
• 1 hour
• Indefinitely.
To set the Reconnect Attempt Interval, scan one of the bar codes below
*Disable Beep on Reconnect Attempt
Enable Beep on Reconnect Attempt
*Attempt to Reconnect for 30 Seconds
Attempt to Reconnect for 1 Minute
Attempt to Reconnect for 5 Minutes