Getting Started 1 - 15
Accessories
The digital scanner and cradle accessories that are available separately include:
•
Power supplies for applications that do not supply power over the host cable. See each host interface
chapter for set up information.
•
Wall-mount bracket for mounting the cradle vertically. Refer to the CR0078-S/CR0008-S Cradle Quick
Reference Guide (p/n 72-135874-xx) for a wall mounting template and installation instructions.
•
Lanyard for wearing the digital scanner on a wrist.
Lanyard
The lanyard attaches to the inside of the digital scanner battery door latch.
Figure 1-10
Attached Lanyard
To attach the lanyard:
1. Open the battery door latch as described in Replacing the Digital Scanner Battery on page 1-9. Do not remove
the battery.
To Next Page
Loading...
