Options Actions
b After you hear a tone, speak your com-
mand into the accessory microphone.
c To call, press and hold the PTT button.
d Wait for the Talk Permit Tone to end, and
speak into the accessory microphone.
The top crescent green LED illuminates
during transmission.
e To stop transmitting, release the PTT
button.
Making private calls through the menu
a Press the Power button to enter Contact
List.
b Press the Volume Up and Volume
Down buttons to navigate to the selected
Contact.
c To call, press and hold the PTT button.
d Wait for the Talk Permit Tone to end, and
speak into the accessory microphone.
e To stop transmitting, release the PTT
button.
Making private calls through the Voice As-
sistant
a Press the Voice Assistant
button.
b After you hear a tone, speak your com-
mand into the accessory microphone.
c To call, press and hold the PTT button.
d Wait for the Talk Permit Tone to end, and
speak into the accessory microphone.
e To stop transmitting, release the PTT
button.
If errors arise when you initiate a call, your device shows the following indications:
•
A tone sounds.
• The top and bottom crescent red LED blinks twice.
6.2
Receiving Calls
When you receive calls, your device shows the following indications:
• For private call only, the device vibrates.
• A tone sounds.
• The top crescent green LED blinks twice continuously.
The call ends if you press the Voice Assistant button or Menu button.
MN009911A01-AA
Chapter 6 : Type of Calls
32
To Next Page
Loading...
