23
Getting More Out Of Your Phone
Short
sends a short fixed-duration tone for each keypress.
Long
sends each tone for as long as you press the key.
Short DTMF tones work with most automated systems.
Some systems (such as home answering machines) may
require long tones for proper activation.
Sending DTMF Tones
Using the Keypad
Press the number keys to send the numbers as DTMF
tones during a call.
Note:
When sending long tones, you may have to enter a
single short keypress first to put the phone in DTMF mode.
Sending Stored Numbers
During a call, highlight a number in the phonebook or
recent calls lists, then:
Monitoring Phone Use
View and Reset Call Timers
Network connection time
is the elapsed time from the
moment you connect to your service provider's network to
the moment you end the call by pressing
O
. This time
includes busy signals and ringing.
The amount of network connection time you track on
your resettable timer may not equal the amount of time
for which you are billed by your service provider. For
billing information, please contact your service
provider directly.
To view a call timer:
Select 1 of the following options:
To reset the call timer:
Using a Timer During a Call
You can set a timer to beep at selected intervals during a
call, and display different types of information during a call.
Select 1 of the following
Beep
options:
Select one of the following
Display
options:
Press To
1
M
open the sub-menu
2
S
scroll to
Send Tones
3
SELECT
(
+
) send number as DTMF tones
Find the Feature
M
>
Recent Calls
>
Call Times
Option Description
Last Call
Approximate time spent on the
last dialed or received call. You
cannot reset this timer.
Dialed Calls
Approximate total time spent on
dialed calls since the last time you
reset this timer.
Received Calls
Approximate total time spent on
calls received since the last time
you reset this timer.
All Calls
Approximate total time spent on
dialed and received calls since the
last time you reset this timer.
Lifetime
Approximate total time spent on
all calls on this phone. You cannot
reset this timer.
Press To
1
RESET
(
+
) reset the time (if available)
2
YES
(
-
) confirm the reset
Find the Feature
M
>
Settings
>
In-Call Setup
>
In-Call Timer
Option Description
60 Seconds
Beep at 1-minute intervals during
a call.
Off
No in-call beep.
Option Description
Time
Display the approximate elapsed
time for the current call.
Cost
Display the cost of the
current call (if you
subscribe to a call cost
option or advice of
charge).
Total Cost
Display the cost of all
calls since the last time
you reset the timer (if
you subscribe to a call
cost option or advice of charge).
Credit Available
Display how much
credit you have left (if
you subscribe to a call
cost option or advice of
charge).
Off
No in-call timer display.
Option Description
To Next Page
Loading...
Need help?
General
