Motorola V300 - Removing and Replacing the Subscriber Identity Module (SIM)

22 September 30, 2003 6809468A80
Disassembly V300/V500
Removing and Replacing the Subscriber Identity Module (SIM)
1. Remove the battery door and battery as described in the procedures.
2. Slide the SIM latch away from the SIM to unlock as shown in Figure 3.
3. Carefully lift the SIM from its contacts.
4. To replace, insert the SIM into the holder, ensuring the keyed corner of the
SIM aligns with the notch molded into the holder.
5. Slide the SIM holder over the SIM to lock.
6. Replace the battery and battery door as described in the procedures.
031829o
Figure 3. Removing the SIM
SIM
SIM Latch
unlock