36 September 30, 2003 6809468A80
Disassembly V300/V500
6. To replace, carefully thread the display flex cable through the slot in the front
housing as shown in Figure 15B.
7. Insert the side of the hinge of the flip assembly with the flex cable into the
knuckle (see Figure 16).
8. Gently slide the other end of the flip hinge into position into the knuckle.
9. Replace the flip cover, transceiver board assembly, rear housing, antenna, SIM,
battery, and battery cover as described in the procedures.
031888o
Figure 16. Reinserting the Flip Assembly
To Next Page
Loading...
