Motorola V70 - Checking Phonebook Capacity; Synchronizing with TrueSync Software

94 Micro-Browser
14
Press
to scroll to the desired inactivity timeout value.
15
Press
OK
( ) to store the timeout value.
Set the CSD Data Rate
Use the data rate option to set the desired data rate for a CSD connection.
1
Press
CHANGE
( ) to select
Data Rate
.
2
Press
to scroll to the desired data rate value.
3
Press
OK
( ) to store the data rate value.
Set the CSD Line Type
Use the line type option to set the network data type for a CSD connection.
1
Press
CHANGE
( ) to select
Line Type
.
2
Press
to scroll to
Modem
or
ISDN
.
3
Press
OK
( ) to store the line type.
Set Operator Alert Messages
Use the confirmation option to enable or disable operator specific alert messages.
1
Press
CHANGE
( ) to select
Confirmation
.
2
Press
to scroll to
On
or
Off
.
3
Press
OK
( ) to store the operator alert value.
Set the Cache Start-Up Value
Use cache start-up to enable or disable the micro-browser’s cached memory.
When cache start-up is turned on, the micro-browser uses content stored in
memory when you launch a browser session. When cache start-up is turned off,
the micro-browser downloads content from the WAP gateway server each time
you launch a browser session.
1
Press
CHANGE
( ) to select
Cache Start-up
.
2
Press
to scroll to
On
or
Off
.
3
Press
OK
( ) to store the operator alert value.
Complete Profile Setup
When you are finished entering information for a network connection profile:
Press
DONE
( ) to store the profile and return to the
Browser Setup
menu.