Getting Started 17
Sending a Call
To call a number, your phone:
•
must be rotated completely open to expose the keypad
•
must be turned on
•
must have a SIM card inserted and unlocked
•
must have a network connection with adequate signal strength
1
Press keypad keys to dial the phone number (up to 32 digits)
Tip:
If you make a mistake, press
DELETE
( ) to delete the last digit, or
press and hold
DELETE
( ) to clear all digits.
2
Press
(send key) to send the call.
A
You can make an emergency call even when the phone is locked, or when a
SIM card is not inserted. See “Dialling an Emergency Number”.
Ending a Call
Press (end key) to end the call.
Receiving a Call
To receive a call, your phone:
•
must be rotated completely open to expose the keypad or have a headset (an
optional accessory) plugged in
•
must be turned on
•
must have a SIM card inserted and unlocked
•
must have a network connection with adequate signal strength
If your phone is locked, you must unlock it to answer the call.
A
Your phone cannot receive calls when your SIM card is locked.
When you receive a call, your phone rings and/or vibrates and displays an
incoming call message.
Press
or
ANSWER
( ) to answer the call.
Displaying Your Phone Number
From the idle display:
Press
to see your phone number.
A
Your phone number must be programmed on your SIM card in order to use
this feature.
To Next Page
Loading...
