Motorola Confidential Proprietary
Manual Test ProceduresLevel 3 Service Manual
2-9
Draft 1.0
GSM RSSI
Verify GSM RSSI by initiating the commands in this
section. Verify that the RSSI results are equal to the
Broadcast Channel (BCH) level. The user will need to
set the RF generator with the following parameters.
Broadcast Channel (BCH): 38
Broadcast Channel (BCH) Level: -105 dBm
Click on 850/1900 (GSM/
DCS) or 1800 (DCS)
Enter Channel 38
Click INIT
Click Execute
Verify return data is approximately -105 dBm
Non-Signaling Test Procedures (GSM/DCS/PCS)