3
PRELIMINARY
Getting Started
X
Getting Started
Turning On/Off Your Radio
A Diagram of your New XTN Series Radio and its Functions can be found on page 8.
Volu me
You can set the volume by adjusting the knob on the top of the radio; P.
Note:
Do not hold the radio too close to your ear when the volume is at a high setting.
Turn
knob
Display Normal Menu Mode
P
Turn knob on the top of the radio clockwise to turn the
radio On. Turn the Knob counterclockwise to turn the
radio Off.
The radio chirps and the display will briefly show all
features and display segments of your radio.
Then, the code area will briefly display the current Channel
(larger number located in the center of the display) and the
Frequency assigned to that Channel.
The Interference Eliminator Code shows briefly. Current
Channel will be left on display.
k
1
6881038B80.book Page 3 Thursday, August 30, 2001 5:33 PM
To Next Page
Loading...
Need help?
General
