3
3. Software Installation
In this chapter, we give installation, configuration, and update/removal procedures for the driver for
Windows 2000, Windows 2003/XP/Vista/2008 (32-bit/64-bit), Windows 7/8/8.1/10 (32-bit/64-bit), Windows
Server 2008 R2/2012/2012 R2/2016 (x64), DOS, Linux (32-bit/64-bit), SCO, and WinCE 5.0. Before
proceeding with the software installation, complete the hardware installation discussed in the previous
chapter, “Hardware Installation.”
Refer to the next chapter, “Serial Programming Tools,” for information about developing your own serial
programming applications. Note that you can install up to 8 PCI Express boards in one system, provided
sufficient I/O address and IRQ number resources are available.
You can download the drivers from the Moxa website.
The following topics are covered in this chapter:
Windows Drivers
Windows 2000, 2003/ XP/ Vista/ 2008 (x86/x64), 7/8 /8.1/ 10 (x86/x64), Server 2008 R2/ 2012/
2012 R2/ 2016 (x64)
Non-Windows Drivers
DOS
Linux (32-bit/64-bit)
SCO
To Next Page
Loading...
Need help?
General
