Moxa Managed Ethernet Switch (UI_2.0_FW_5.x) User Manual
Access Control Rule Settings
You can edit access control rules on this page. Each ACL includes up to 10 rules. First, select the access
control prof ile you would like to edit based on the ACL ID, and then set up the rule content and
ingress/egress ports. After configuring, click the Add button to add the rule to the list. Finally, click Apply to
activate the settings.
An access control rule displays setting options based on the filtering type used:
IP Based (Layer 2 Device)
NOTE
The DSCP override rule will only be executed when permitted by the rules in the ACL.
To Next Page
Loading...
Need help?
General
