Moxa Technologies NPort 5130A User Manual

NPort 5000 Series User Manual
107
4. Refer to Chapter 2 for each parameter’s function definition. To modify the configuration, you must first
click in the modify box to activate the parameter setting box.
ATTENTION
You can simultaneously modify the configurations of multiple NPort units that are of the same model. To
select multiple NPort units, hold down the Ctrl key when selecting additional NPort units, or hold down the
Shift key to select a group of NPort units.
Upgrading the Firmware
Follow these steps to upgrade the firmware of an NPort.
1. To start NPort Administrator, click Start > NPort Administration Suite > NPort Administrator.

Moxa Technologies NPort 5130A Specifications

General

Isolation	1.5 kV
Certification	CE, FCC
Serial interface type	RS-422, RS-485
Serial ports quantity	1
Ethernet LAN data rates	10, 100 Mbit/s
Supported network protocols	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, HTTP, SMTP, IGMP v1/2
Compatible operating systems	SCO Unix, OpenServer UnixWare v2.1, v7 Unix SVR 4.2 Unix QNX 4.25, QNX 6 Solaris 10 FreeBSD AIX 5.x HP-UX 11i Mac OS v10.3 Linux v2.4.x, v2.6.x
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	5 - 95 %
Input voltage	12 - 48 V
Safety	UL, LVD

Weight and Dimensions

Weight	340 g
Dimensions (WxDxH)	52 x 80 x 22 mm