Moxa Technologies NPort 5130A - IP Serial LIB Function Groups

NPort 5000 Series User Manual
162
IP Serial LIB Function Groups
Server Control Port Control Input/Output Data
Port Status
Inquiry
Miscellaneous
nsio_init
nsio_end
nsio_resetserver
nsio_checkalive
nsio_open
nsio_close
nsio_ioctl
nsio_flowctrl
nsio_DTR
nsio_RTS
nsio_lctrl
nsio_baud
nsio_resetport
nsio_read
nsio_SetReadTimeouts
nsio_write
nsio_SetWriteTimeouts
nsio_lstatus
nsio_data_status
nsio_break
nsio_break_on
nsio_break_off
nsio_breakcount
Example Program
char NPort 5100A-Nip=”192.168.1.10”;
char buffer[255];
int port = 1;
int portid;
nsio_init();
portid = nsio_open(
NPort 5100Aip, port);
nsio_ioctl(portid, B9600,
(BIT_8 | STOP_1 |
P_NONE) );
sleep(1000);
nsio_read(port, buffer, 200);
nsio_close(portid);
nsio_end();
/*data buffer, 255 chars */
/*1st port */
/* port handle */
/*initial IP Serial Library */
/*1st port,
NPort 5100A
IP=192.168.1.10 */
/*set 9600, N81 */
/* wait for 100
0 ms for data */
/* read 200 bytes from port 1 */
/* close this serial port */
/* close IP Serial Library */