Moxa Technologies NPort 5130A User Manual

NPort 5000 Series User Manual
120
Always Accept Open Requests: Even the driver cannot establish the connection to NPort, user's
software still can open the mapped COM port just like a onboard COM port.
Ignore TX Purge: The application can use Win32 API PurgeComm to clear the output buffer and
terminate outstanding overlapped write operations. Select Ignore TX Purge if you do not want the
output buffer to be purged.
7. The Serial Parameter settings shown here are the default settings when the NPort is powered on.
However, the program can redefine the serial parameters to different values after the program opens
the port via Win 32 API.

Moxa Technologies NPort 5130A Specifications

General

Isolation	1.5 kV
Certification	CE, FCC
Serial interface type	RS-422, RS-485
Serial ports quantity	1
Ethernet LAN data rates	10, 100 Mbit/s
Supported network protocols	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, HTTP, SMTP, IGMP v1/2
Compatible operating systems	SCO Unix, OpenServer UnixWare v2.1, v7 Unix SVR 4.2 Unix QNX 4.25, QNX 6 Solaris 10 FreeBSD AIX 5.x HP-UX 11i Mac OS v10.3 Linux v2.4.x, v2.6.x
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	5 - 95 %
Input voltage	12 - 48 V
Safety	UL, LVD

Weight and Dimensions

Weight	340 g
Dimensions (WxDxH)	52 x 80 x 22 mm