EasyManuals Logo

Moxa Technologies NPort 5130A User Manual

Moxa Technologies NPort 5130A
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
NPort 5000 Series User Manual
19
On the Basic Settings screen, select the COM port number that will be mapped to the device port. You can
map multiple COM ports at the same time by selecting the Auto Enumerating check box to number the
COM ports automatically.
On the Serial Parameters screen, adjust the settings to match your device. These settings, which are only
used for serial printers, must also match the settings on the device port. Click OK when you are satisfied
with your changes.

Table of Contents

Other manuals for Moxa Technologies NPort 5130A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Moxa Technologies NPort 5130A and is the answer not in the manual?

Moxa Technologies NPort 5130A Specifications

General IconGeneral
Isolation1.5 kV
CertificationCE, FCC
Serial interface typeRS-422, RS-485
Serial ports quantity1
Ethernet LAN data rates10, 100 Mbit/s
Supported network protocolsICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, HTTP, SMTP, IGMP v1/2
Compatible operating systemsSCO Unix, OpenServer UnixWare v2.1, v7 Unix SVR 4.2 Unix QNX 4.25, QNX 6 Solaris 10 FreeBSD AIX 5.x HP-UX 11i Mac OS v10.3 Linux v2.4.x, v2.6.x
Storage temperature (T-T)-40 - 85 °C
Operating temperature (T-T)0 - 60 °C
Operating relative humidity (H-H)5 - 95 %
Input voltage12 - 48 V
SafetyUL, LVD
Weight and Dimensions IconWeight and Dimensions
Weight340 g
Dimensions (WxDxH)52 x 80 x 22 mm

Related product manuals