Moxa Technologies NPort 5250A User Manual

NPort 5000 Series User Manual
23
The NPort homepage will open. On this page, you can see a brief description of the Web Console’s function
groups.
Web Interface for the NPort 5100, 5200, and IA5000 Series Only
Web Interface for the Overall NPort 5000 Series
ATTENTION
If you can’t remember the password, the ONLY way to start configuring the NPort is to load factory
defaults by using the Reset button located near the NPort’s Ethernet port.
Remember to use NPort Administrator (for NPort 5000 and NPort IA5000 Series) to export the
configuration file when you have finished the configuration. After using the Reset button to load factory
defaults, your configuration can be easily reloaded into NPort by using the NPort Administrator Import
function. Refer to Chapter 5 for details about using the Export and Import functions

Moxa Technologies NPort 5250A Specifications

General

Certification	CE, FCC EN 55022 Class A, FCC Part 15 Subpart B Class A EN 55024 EN 61000-4-4 EN 61000-4-5
Serial interface type	RS-232/422/485
Serial ports quantity	1
Supported network protocols	ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2
Storage temperature (T-T)	-40 - 75 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	5 - 95 %
Safety	UL 60950-1, EN 60950-1

Weight and Dimensions

Weight	340 g
Dimensions (WxDxH)	77 x 111 x 26 mm