Moxa Technologies NPort 5250A User Manual

NPort 5000 Series User Manual
96
S Registers
No.
S Register
Description & default value
Remarks
1
S0
Ring to auto-answer (default=0)
2
S1
Ring counter (always=0)
no action applied
3
S2
Escape code character (default=43 ASCII “+”)
4
S3
Return character (default=13 ASCII)
5
S4
Line feed character (default=10 ASCII)
6
S5
Backspace character (default= 8 ASCII)
7
S6
Wait time for dial tone (always=2, unit=sec)
no action applied
8
S7
Wait time for carrier (default=3, unit=sec)
9
S8
Pause time for dial delay (always=2, unit=sec)
no action applied
10
S9
Carrier detect response time (always=6, unit 1/10 sec)
no action applied
11 S10
Delay for hang up after carrier
(always=14, unit 1/10 sec)
no action applied
12
S11
DTMF duration and spacing (always=100 ms)
no action applied
13 S12
Escape code guard time
(default=50, unit 1/50 sec)
to control the idle time for “+++”
Parameter Setting
Factory
Default
Description Necessity
TCP Alive
Check Time
0 to 99 min 7 min
0 min: TCP connection is not closed due to an
idle TCP connection.
1 to 99 min: The NPort closes the TCP
connection automatically if there is no TCP
activity for the given time.
Required
Local TCP port 1 to 65535 4001
The TCP port that other devices must use to
contact this device. To avoid conflicts with
standard TCP ports, the default is set to 4001.
Required

Moxa Technologies NPort 5250A Specifications

General

Certification	CE, FCC EN 55022 Class A, FCC Part 15 Subpart B Class A EN 55024 EN 61000-4-4 EN 61000-4-5
Serial interface type	RS-232/422/485
Serial ports quantity	1
Supported network protocols	ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2
Storage temperature (T-T)	-40 - 75 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	5 - 95 %
Safety	UL 60950-1, EN 60950-1

Weight and Dimensions

Weight	340 g
Dimensions (WxDxH)	77 x 111 x 26 mm