Moza Air 2S - General Menu Settings

17
L1
L2
L3
L4
L5
Value
Function
Advanced
iFocus
F2
switch
? /ok/err
turn on/off the focus motor 1
set A
? /ok/err
set the point A of focus motor 1
set B
? /ok/err
set the point B of focus motor 1
clear AB
? /ok/err
Clear the calibration information
guidance
>
Enter the guidance mode
Dolly Zoom
>
Enter the dolly zoom mode
Inception
speed
0-100
set the rotation speed of inception
mode
Motion
Control
switch
tilt
? /on/off
turn on/off the motion control of tilt
axis
roll
? /on/off
turn on/off the motion control of
roll axis
pan
? /on/off
turn on/off the motion control of
pan axis
speed
0-100
set the rotation speed of motion
control
Tracking
speed
0-100
set the max speed of tracking
Manual
Positioning
tilt
on/off
turn on/off the manual positioning
of tilt axis
roll
on/off
turn on/off the manual positioning
of roll axis
pan
on/off
turn on/off the manual positioning
of pan axis
Calibration
gyro
? /ok
calibrating/calibrated the gyroscope
acc
? /ok
calibrating/calibrated the
accelerometer
angle
offset
tilt
0-100
set the offset value of tilt axis
roll
0-100
set the offset value of roll axis
pan
0-100
set the offset value of pan axis
General
Language
English
*
switch display language to English
中文
*
switch display language to Chinese
Config
config1
save
? /ok
save to configuration 1
load
? /ok
load configuration 1
config2
save
? /ok
save to configuration 2
load
? /ok
load configuration 2
config3
save
? /ok
save to configuration 3
load
? /ok
load configuration 3
reset
? /ok
restore default parameter settings
About
device name and about firmware
information
Menu type introduction:
If there is a “＞” mark at the right side of the selected item, press the dial right button for
the next menu.
If the selected item has a “[]”and contains a number, rotate the dial to adjust its value.
If the selected item has a “()”and contains an option, press the right button to switch
among options.