Notes:
1. If there is a “*” at the right side of one item, the current list is the final option,
press the dial right button to launch it.
2. If the selected item and other items in the menu list don’t have any marks,
press the dial right button to launch the option once. “>” is displayed during the
process. “OK” is displayed after the process is completed, and “ERR” is displayed
if the option fails.
3. Filtering parameters: When the motor vibrates with high frequency, the value
should be turned down. When the motor vibrates with low-frequency, the value
should be increased.
4. The manual positioning function has lower priority than the following
function. When using manual positioning function normally, following function
of the axis should be turned off.
To Next Page
Loading...
