MPP Solar LVX 6048 User Manual

12
Indicates battery level by 0-24%, 25-49%, 50-74% and 75-100% and
charging status.
Load information
Indicates overload.
Indicates the load level by 0-24%, 25-49%, 50-74%, and 75-100%.
0%~24%
25%~49%
50%~74%
75%~100%
Mode operation information
Indicates unit connects to the mains.
Indicates unit connects to the 1
st
PV panel
Indicates the solar charger is working
Indicates the DC/AC inverter circuit is working.
Mute operation
Indicates unit alarm is disabled.
LCD Setting
After pressing and holding ENTER button for 3 seconds, the unit will enter setting mode. Press “UP” or “DOWN”
button to select setting programs. And then, press “ENTER” button to confirm the selection or ESC button to
exit.
Program
Description
Selectable option
00
Exit setting mode
Escape
01
Output source priority selection
SUB(default)
Solar energy provides power to the
loads as first priority.
If solar energy is not sufficient to
power all connected loads, Utility
energy will supply power to the loads
at the same time.
SBU
Solar energy provides power to the
loads as first priority.
If solar energy is not sufficient to
power all connected loads, battery
energy will supply power to the loads
at the same time.
Utility provides power to the loads

MPP Solar LVX 6048 Specifications

General

Brand	MPP Solar
Model	LVX 6048
Category	Inverter
Language	English