Secondary CPU version checking.
Secondary CPU version 00020.21
Operating Mode Description
Standby mode
Note:
*Standby mode: The inverter
is not turned on yet but at
this time, the inverter can
charge battery without AC
output.
*Power saving mode: If
enabled, the output of
inverter will be off when
connected load is pretty low
or not detected.
No output power, solar
or utility charger
available
Battery is charged by utility.
Battery is charged by PV energy.
Battery is charged by utility and PV energy.
Battery is charged by PV energy and feed PV energy to
grid.
Output power from
utility. Charger
available
Utility charges battery and provides power to load.
Utility and battery power provide power to load.
Output power from
utility. Charger
available
PV energy, battery power and utility provide power to
load.
To Next Page
Loading...
Need help?
General