MPP Solar PIP5048MKX - Page 18

16
02
Maximum charging current:
To configure total charging
current for solar and utility
chargers.
(Max. charging current =
utility charging current +
solar charging current)
60A (default)
PIP5048MKX model setting
range is from 10A to 100A and
increment of each click is 10A.
05
Battery type
AGM (default)
Flooded
User-Defined
If “User-Defined” is selected,
battery charge voltage and low
DC cut-off voltage can be set up
in program 26, 27 and 29.
Pylontech battery
If selected, programs of 02, 26,
27 and 29 will be automatically
set up. No need for further
setting.
WECO battery
If selected, programs of 02, 12,
26, 27 and 29 will be auto-
configured per battery supplier
recommended. No need for
further adjustment.
Soltaro battery
If selected, programs of 02, 26,
27 and 29 will be automatically
set up. No need for further
setting.
LIb-protocol compatible
battery
Select “ LIb” if using Lithium
battery compatible to Lib
protocol. If selected, programs
of 02, 26, 27 and 29 will be
automatically set up. No need
for further setting.