Need help?Do you have a question about the MR MESSKO MLog IM50 and is the answer not in the manual?
General| Brand | MR |
|---|---|
| Model | MESSKO MLog IM50 |
| Category | Control Systems |
| Language | English |
Information regarding safety precautions for fitting and operation of the device.
Defines the purpose of the MESSKO MLog transport monitor for monitoring goods during transport.
Emphasizes compliance with accident prevention and installation regulations.
Details the two available versions, IM50 and IM100, and their extension stages.
Lists the items included in the packaging for the MLog transport monitor.
Instructions for replacing batteries and inserting a SIM card for the IM100 model.
Step-by-step guide for installing the MLog Analyser software on a PC.
Identifies and explains the operating elements and status LEDs on the MLog IM100 device.
Describes how to check the device status, including display and battery prognosis.
Identifies and explains the operating elements and status LEDs on the MLog IM50 device.
Explains how to interpret the status LEDs for battery and operation modes on the IM50.
Instructions for initiating a recording directly on the MLog IM50 device.
Procedure for replacing batteries in both MLog IM50 and IM100 models.
How to set user markers in the logbook for specific events during transport.
Checking batteries and optionally inserting a SIM card for the MLog IM100.
Connecting the MLog to a PC and setting up the Analyser software.
Setting up transport names, recording intervals, and sensor parameters.
Physically mounting the MLog and initiating the transport recording.
How to check the MLog's status using LEDs, display, and logbook.
Instructions for replacing batteries during an ongoing transport.
Interpreting the flashing Event/Alarm LED indicating limit value exceedance.
Reading the logbook and displaying measured data as diagrams.
Generating, saving, and printing transport evaluation reports in PDF format.
Saving GPS route data in KMZ format for display in Google Earth.
Deleting the log book to prepare the MLog for a new recording.
Details on housing, materials, display, operating elements, software, and power supply.
Technical data for acceleration, temperature, and humidity measurements.
Details on digital and universal input capabilities for the IM100 model.
Lists optional accessories available for order, with article numbers.
Technical drawings and dimensions of the MLog device.
Pin assignments and color coding for external sensor connections on the IM100.
To Next Page