MR MESSKO MLog IM50 User Manual

24 BA3431002/04 RU-EN
3 Basic operation
Event LED EVENT/ALARM (red)
Device analyses shock 1x ashing
3.6 Start recording direct via MLog IM50
Function Action
LED
Precondition
ACTIVE
(green)
EVENT/
ALARM (red)
Start
recording
press ON button
longer than
4 seconds
off off
No recording is in progress and memory is
empty
3.7 Battery replacement (MLog IM50 and IM100)
Function Action
LED
BATTERY
(yellow)
Note
Announce battery
replacement
press OFF button longer
than 4 seconds
lights
permanent
The event is recorded in the Log Book;
the device continues to record data and
recognizes the exceeding of limit values;
GPS, GSM and bluetooth are deactivated in the
meantime;
the display of the IM100 is inactive;
during the next 30 minutes the batteries can be
replaced.
Note that when replacing the battery, the
USB cable must be disconnected from the
computer. This ensures that the prognosis
of the remaining battery runtime is working
correctly.
Abort / conclude
battery replacement
press OFF button longer
than 4 seconds
goes out
GPS, GSM and bluetooth are again activated,
provided the battery status is sufcient
3.8 Set user marker (MLog IM50 and IM100)
Function: set user marker
Action
LED EVENT/ALARM
(red)
Result
Press „OFF“ button
and hold and then
briey press „ON“
button
lights 2 seconds
A new event with time stamp is recorded in the Log Book.
The next marker can be set as soon as the red LED is off
again.

MR MESSKO MLog IM50 Specifications

General

Brand	MR
Model	MESSKO MLog IM50
Category	Control Systems
Language	English