7 Maintenance, inspection and care
77BA5831400-00 EN
Maintenance
The device is maintenance-free.
Inspection
Depending on the conditions of use of the device and the national regula-
tions in the respective country of use, the transformer manufacturers can
specify different inspection intervals.
► Observe the inspection intervals defined in CIGRE Publication No. 445
"Guide for Transformer Maintenance" or the inspection intervals specified
by the transformer manufacturer.
During occasional visual inspections of the transformer, you can inspect and
clean the device as follows:
1. Clean the housing of the device with a dry cloth.
2. Make sure that the ventilation is free of dirt and deposits.
3. Check the device for external damage and contamination.
In the event of questions or irregularities, contact the Technical Service de-
partment:
Maschinenfabrik Reinhausen GmbH
MR Service & Complaint
Falkensteinstrasse 8
93059 Regensburg, Germany
E-mail: service@reinhausen.com or complaint@reinhausen.com
To Next Page
Loading...
