5 Overview of parameters
30
Parameter Setting range Factory setting Current setting
Analog value desired
value min
0...100 % 0.0 5
Analog value desired
value max
0...100 % 100.0 %
Minimum desired val-
ue
0...140 V 80.0 V
Maximum desired val-
ue
0...140 V 140.0 V
Configuration > Communication interface
2)
Communication proto-
col
see operating in-
structions
Modb. ASCII
Modbus format see operating in-
structions
8E1
Communication port RS232; RS485;
Ethernet; OF
RS232
Baud rate communica-
tion
9.6 kilobaud;
19.2 kilobaud;
38.4 kilobaud;
57.6 kilobaud
9.6 kilobaud
Network address 0.0.0.0...255.255.
255.255
0.0.0.0
TCP port 0...32,767 1,234
OF light on/off On, Off Off
Local SCADA address 0...9,999 0
SCADA master ad-
dress
0...9,999 0
To Next Page
Loading...
