MR VACUTAP - Page 26

3 Product description
Maschinenfabrik Reinhausen GmbH 202026 5788897/03 ENVACUTAP
®
VVS
®
3.2.2.1 Drive shaft without cardan joint and without insulator
Figure12: Drive shaft without cardan joint and without insulator (= standard version)
Configuration V 1 min Intermediate bearing
Middle of hand crank – middle of
bevel gear (maximum permissible
axial offset 2°)
536 mm When the maximum value
of 2472 mm is exceeded, it
is necessary to use an in-
termediate bearing.
V 1 ≤ 2472 mm (without in-
termediate bearing)
V 1 > 2472 mm (with inter-
mediate bearing)