MR VACUTAP - Page 27

3 Product description
Maschinenfabrik Reinhausen GmbH 2020 275788897/03 EN VACUTAP
®
VVS
®
3.2.2.2 Drive shaft without cardan joint and with insulator
Figure13: Drive shaft without cardan joint and with insulator (= special model)
Configuration V 1 min Intermediate bearing
Middle of hand crank – middle of
bevel gear (maximum permissible
axial offset 2°)
706 mm When the maximum value
of 2472 mm is exceeded, it
is necessary to use an in-
termediate bearing.
V 1 ≤ 2472 mm (without in-
termediate bearing)
V 1 > 2472 mm (with inter-
mediate bearing)