Why my MRC BWLC-C2-K Scales are not turning on?
If your MRC Scales aren't turning on, it could be due to discharged batteries. Try connecting them to the mains or replacing the batteries. Another possibility is that the batteries are missing, not installed, or improperly installed. Ensure they are correctly installed with the proper polarization.
What to do if my MRC Scales show 'LH' message after turning on?
If you see an 'LH' message on the display of your MRC Scales after turning it on, it means the weight pan was loaded during the power-up sequence. Remove the load from the pan, and the scale should then indicate zero.
How to stop MRC BWLC-C2-K Scales from turning off automatically?
To stop the MRC Scales from automatically turning off, navigate to the 'othr' submenu and change the '5.4 t1' setting to 'no'.
To Next Page
General