16.7. Measurement of maximal force on the pan – latch
Procedure:
• Enter to <toP> function:
• Confirmation of choice of <toP> function is indication of
the Max pictogram:
• Apply a force to the weighing pan,
• The display of scale
will latch the maximum value of the force,
• Remove loads from the pan,
• Before the next measurement press the key.
Return to weighing:
•Press the key twice.
16.8. Totalizing
Scale software is equipped in a totalizing function of single weighings.
The totalizing procedure can be documented on the printer connected
to the indicator.
- 49 -
To Next Page
Loading...